Paramedichutes recommends the freebag method of using deployment bags. We have found this method to be the most reliable of getting the main canopy out in an organized fashion.
We recommend using a pilot chute sized to recover the nosecone, hardware, tethers, and bag at a descent rate similar to the rocket under its main. If the nose comes down slower, that’s fine, but we do not recommend it be any faster than the main assembly, as we’ve seen –and repaired– one too many main canopies damaged by nosecone strikes.
If you need assistance in choosing a deployment bag size, or a pilot chute, do not hesitate to contact us.
Each PPE bag is made from fire-resistant Nomex, and sewn with Kevlar thread. Fire protection of blankets and “dog barf” wadding is still recommended as there are no heat-resistant elastics accessible to the rocketry recovery market. There are elastic keepers for the lines, and nylon webbing to tether to your pilot chute.
The PPE-406 has two rows of keepers and will accommodate chutes up to the BLS-60 in 4″ airframes.
The PPE-409 has three rows of keepers and will accommodate chutes up to the ALS-72 in 4″ airframes.
The PPE-412 has three rows of keepers and will accommodate chutes up to the ALS-96 in 4″ airframes.
Longer bags can be made as a custom order. Contact us with your project’s particulars, and we will be thrilled to make something just for you.